Please note:

To provide the best possible viewing experience please use Internet Explorer 8.0 or higher, Firefox, Chrome, or Safari.

Distributor Log in Sign up


Having problems logging in?
Please contact us at (800) 342-6329 ext. 203

Call 216.341.2022

Combo Shrink Systems | Express Combo System HSE100

Rapid_hs_large_icon

Product Overview

The brand new HS Express! Ideal for low-volume applications as a step-up from manual packaging. Choose the Tabletop base model and ADD a Leg Kit, Sealing Conveyor, Heated Hole Punch or all three! 

RapidHS is Back!

Features
  • Control Panel
  • Express Control Panel for Machine Operations
  • Single Plug 115V Power Supply
  • Sealing Area
  • Impulse Wire Seal System
  • Large 16" W by 20" L Seal Area
  • Standard Seal Head with Film Clamps
  • Balanced Magnetic Hold Down
  • Adjustable Height Wrapping Platform
  • Pre-Wired Seal Conveyor Ready
  • Shrink Tunnel
  • Independent Tunnel Temperature Control
  • Non-Stick Mesh Tunnel Belt
  • Automatic Cool Down Extends Heating Element Life
  • Other Features
  • RAPIDHS - Standard Machine Options will Ship in 5 Days or Less
  • Individually Adjustable Perforating Wheels
  • Adjustable Film Cradle
  • One Year Warranty

Machine Specs & Options

Film Capacity: 20” Wide (51 cm)
L Bar Seal Area: 16” W, 20” L (41 W, 51 L cm)
Inside Tunnel Dimensions: 20” L, 15.25” W, 6.75” H (51 L, 39 W, 17 H cm)
Tunnel Conveyor Speed: 0- 10 Feet per Minute (0- 3 meters per minute)
Overall Dimensions: 76.5” L, 24” W, 55” H (195 L, 61 W, 140 H cm)
Working Height: 36” (92 cm)
Power Requirements: 115 Volts, 20 Amp, Single Phase
Tunnel Wattage: 2,000  Watts
Weight: 315 lbs. (143 kg) (without leg kit); 380 lbs (172 kg) (with leg kit)

*Standard machine options available on the program are denoted with the RapidHS icon.

Options
  • Leg Kit Rapid_hs_mini_icon ico_question
  • Silicone Fabric Sealing Conveyor Rapid_hs_mini_icon ico_question
  • ADD Heated Hole Punch
  • Spare Parts Kit (5820-015) Rapid_hs_mini_icon
  • Export Crating ico_question

Videos

  • HSE100 Standard Duty Features

    THe HSE100 is a standard duty shrink combination machine.  Proudly made in Cleveland, OH, the HSE100 is built to last. Contact your sales rep for more details.

  • HDX Line & HSE Paper Products Application

    The HSE100, HDX250, and HDX350 are shown together in this video running paper products.  See the capabilities of all three new models in one video!  

General Questions

How to thread film on L Sealers


  1. Place a roll of centerfold film on the film unwind rollers with the open side of the film facing the operator and thread the lower side of the film underneath the package tray.
    • (Refer to the threading diagram on the .pdf and on the film guide)
  2. Place a product to be wrapped on the package tray near the sealing area.
  3. Loosen the knobs under the film rollers and position the film rack so that the folded side of the film is in line with the back edge of the product to be wrapped.
  4. Re-tighten the knobs to hold the film rack position in place.
  5. If the correct width of film is being used, this position will provide an adequate amount of film across the front of the sealing area.
  6. This is a starting position and adjustments can be made to provide the appropriate amount of film around the package for shrinking and conservative use of the film. Discard the unused film when done.

Troubleshooting

Film won't separate; Static or film collapses package

Off-centered seal


  • Adjust the package platform.
  • Loosen the knobs on the tension blocks.

Severe Ballooning


  • Increase the tunnel temperature
  • Check condition/position of air evacuation holes

Erratic Shrink


  • Make sure the tunnel is functioning properly
  • Slow down tunnel conveyor
  • Adjust the tunnel air flow
  • Increase tunnel chamber temperature

Burn holes (Hot spots)


  • Check the condition of the air evacuation holes
  • Speed up the tunnel conveyor
  • Decrease the tunnel chamber temperature

Dog ears


  • Use less film around the package
  • Slow down the tunnel conveyor
  • Check the condition of the air evacuation holes
  • Increase the tunnel temperature

Angel hair


  • Check and clean wire, wire insulation or knife blades
  • Check condition of sealing pads and Non-stick tape, change if necessary
  • Check for even arm and magnet pressure, make sure the magnets release at the same time
  • Check the minimum sealing temperatures
  • Check the seal cycles is complete
  • Check the condition of the air evacuation holes
  • Increase the sealing temperatures

Fish eyes


  • Make sure tunnel is functioning properly
  • Slow down tunnel conveyor
  • Use less film around the package
  • Increase the tunnel temperature

Crows feet


  • Slow down tunnel conveyor
  • Increase the tunnel chamber temperature

Film buildup on sealing wire


  • Check and clean wire, wire insulation or knife blades
  • Check the condition of the sealing pads
  • Check the Non-stick tape, change if necessary
  • Check for even arm and magnet pressure
  • Check the minimum sealing temperatures, or increase the sealing temperatures

Film smokes excessively


  • Check and clean wire and wire insulation
  • Check and clean knife blade
  • Check condition of sealing pads
  • Check condition of Non-stick tape
  • Check for even arm and magnet pressure
  • Check the minimum sealing temperatures
  • Increase the sealing temperatures
  • Decrease the dwell time

Film splits at top of package


  • Check hole punch for proper alignment.
  • Check the condition of the punched holes.
  • Make sure the tunnel is functioning properly.
  • Speed up the tunnel conveyor.
  • Decrease the tunnel temperature.
  • Adjust the air flow.

Film splits at hole punch


  • Check hole punch for proper alignment.
  • Check the condition of the punched holes.

Film splits along centerfold

Maintenance