To provide the best possible viewing experience please use Internet Explorer 8.0 or higher, Firefox, Chrome, or Safari.
The new Energy Smart® Wrapper proven to significantly reduce energy costs by 80%. The Energy Smart® ScaleMate® is an on-demand hand wrap machine, which the seal plate only consumes energy when you need to seal a package. This unit is actuated when you place a product on the seal plate, the photo eye sees the product and actuates the seal cycle. The SM20ES has a GFCI in the electrical box.
For more information on the ScaleMate® options, visit: www.heatsealco.com/scalemate
Calculate your savings and find more information about utility rebates on the Energy Smart® page.
Please contact Stephanie at (216) 341-2022 ext. 208 or sdutton@heatsealco.com for information regarding the qualification process, testing program, education and commercialization.
Model | SM20ESC | SM20ESA |
Film Capacity | Two 20" NEW Cradle Mount | Two 20" Axle Mount |
Seal Plate | 6" x 15" | |
Overall Dimensions | 28.5”D, 25”W, 39”H | |
Working Height | 36" | |
Power Requirement |
115 Volt, 60Hz, 132 Watts |
|
Estimated Shipping Weight | 100 lbs. - 125 lbs. (Depending on options) |
For more information on the ScaleMate® options, visit: www.heatsealco.com/scalemate
Depending on what you pay per kilowatt hour, the chart below shows how much the Energy Smart Wrapper can save you, per unit per year. Use the Avg Price of Electricity by State sheet to estimate kWh costs in your state.
Find your Energy Smart operating manuals here.
The Energy Smart wrapper is easy to maintain. Always remember to power off the unit before cleaning. Here are some tips to prolong the life of your unit.
Ensure the Non-Stick Cover is in good condition. Replace when worn or about every 3 months.
Clean the cut-off rod for best film cutting. Place paper towels below the cut off rod and spray the cutoff with an FDA degreaser, scrub with a scouring pad (ie. Scotch Brite) to remove the build up from the rod.
Keep Seal Plate clean of juices. Spray a soft cloth or paper towel with cleaner or degreaser if necessary to remove any juices. Avoid spraying the seal plate directly.
The wrappers are wipe down only. DO NOT submerge or wash down the wrappers.