Please note:

To provide the best possible viewing experience please use Internet Explorer 8.0 or higher, Firefox, Chrome, or Safari.

Distributor Log in Sign up


Having problems logging in?
Please contact us at (800) 342-6329 ext. 203

Call 216.341.2022

Heavy Duty Semi-Automatic | Model HDX2030

heavy duty L Bar Sealers 20 inch by 30 inch
  • heavy duty L Bar Sealers 20 inch by 30 inch
  • heavy duty L Bar Sealers 20 inch by 30 inch

Product Overview

Our heavy duty L bar sealer HDX2030 has a hot knife seal system and TWO year warranty, with a 21 inch by 30 inch seal area.

Heat Seal is happy to provide samples of your product packaged on our machines, please contact your sales rep for more information.

Features
  • Control Panel
  • Top Mounted, Easy Access Control Panel
  • RS-5 Plus Digital Controller with Easy to Use and Understand Controls
  • Single Plug 115V power supply
  • Sealing Area
  • Cast Aluminum Seal Head with Film Clamps
  • Magnetic Hold Down With Adjustable Pressure And Dwell Time
  • Posi-Trac Seal Conveyor
  • Other Features
  • Two Year Warranty
  • Console Unit, Storage Cabinet, Heavy Duty Adjustable Levelers & Casters
  • Individually Adjustable Perforating Wheels
  • Adjustable Film Roll Cradle with Brake
  • Film Seperator Rod
  • Stainless Steel Product Loading Tray
  • Stainless Steel Model Available

Machine Specs & Options

Film Capacity 24” Wide (61 cm)
L Bar Seal Area   21” W, 30” L
Overall Dimensions 72” L, 35” W, 46”H 
Working Height 36” (91 cm)
Weight  350 lbs. (159 kg)
Power Requirements  115 Volts, 20 Amp Single Circuit with Ground

 

Options
  • 220V Electrical Wiring
  • Stainless Steel Construction (HDX2030) ico_question
  • Air Actuated Sealing Head ico_question
  • Powered Film Unwind with Perforating Roller and 10 Inch High Adjustable Inverting Head ico_question
  • Stand Alone Power Scrap Wind-Up
  • Spare Parts Kit
  • Left Hand Reverse Flow ico_question
  • Export Crating ico_question

Videos

  • L Bar Sealer HDS-2020

General Questions

What is an RS-5 Plus controller and what are the benefits?


*The RS-5 Plus Replaces the RS-3 Controller*
  • The RS-5 Plus is a programmable electronic controller designed to control an L Sealer or Combination Shrink System. The RS-5 Plus is setup to control several machine configurations through the digital keypad. The controller can be configured to control either impulse or hot knife L Sealers equipped with or without a shrink tunnel.
  • The RS-5 Plus controls: Seal Time, Side & Front Seal Temp, Seal Conveyor Run Time, Seal Conveyor Speed, Tunnel Conveyor Speed, Tunnel Temperature, Cycle Count, and Heated Hole Punch. 
  • Benefits of the RS-5 Plus Digital Controller:
    • Intuitive User Interface - Easy to use and understand control screens
    • Control Assurance - Precise, accurate digital settings
    • Durable and Robust - Heavy Duty Controller for high volume usage with repeatable results
    • Reliable - Precise PID temperature controls provide the most consistent operating temperature
    • Universal - Common controller across multiple Heat Seal machines
    • Certified - Meets UL 508A Standards
    • All with an Industry First - THREE Year Warranty on the machine’s original controller

How to thread film on L Sealers


  1. Place a roll of centerfold film on the film unwind rollers with the open side of the film facing the operator and thread the lower side of the film underneath the package tray.
    • (Refer to the threading diagram on the .pdf and on the film guide)
  2. Place a product to be wrapped on the package tray near the sealing area.
  3. Loosen the knobs under the film rollers and position the film rack so that the folded side of the film is in line with the back edge of the product to be wrapped.
  4. Re-tighten the knobs to hold the film rack position in place.
  5. If the correct width of film is being used, this position will provide an adequate amount of film across the front of the sealing area.
  6. This is a starting position and adjustments can be made to provide the appropriate amount of film around the package for shrinking and conservative use of the film. Discard the unused film when done.

Application Data


Your Heat Seal sales rep may require an application data sheet and product samples for certain applications.  Please contact your Heat Seal rep for questions or concerns.

 


Troubleshooting

Maintenance